Features

• Two Built-in 500V Charge Controllers
• Battery Disconnect
• 48V Battery Input
• Battery Temp Sensor
• Auto-Generator Start
• Rapid Shut Down Signal
• Current Sensor Included
• Battery Communications
• PV Disconnect
• Wiring Knockouts & WiFi

This model has a high continuous output power of up to 300w AC, recommended for photovoltaic modules of 450W maximum and fully complies with the NEC 2014/2017 section 690. 12 requirements for fast shutdown. No additional equipment required.

Features

• Qualified equipment that meets Hawaiian Electric TrOV-2 and full
  frequency and voltage ride-through
• Cable options including conventional trunk cable and daisy chain
• Thinnest micro inverter in world, 25mm in thickness
• Designed for frame mount (AC module), as well as rail mount solutions 38 W solar panels
• High efficiency with 95.5% CEC
• Globally certified for c-ETL-us, SAA, TUV, VDE-ARN-N 4105, VDE 0126 G83/2, CEL 021, IEC61727, EN50438
• Integrated grounding for easy installation
• NEMA-6/IP-66/IP-67 enclosure rating
• Integrated monitoring and power line communication with BDG-256 gateway
• Fully comply with NEC 2014/2017 section 690.12 Rapid Shutdown requirement. No additional equipment is required

The BDM 600 solar microinverter is designed to support up to two 385W high power panels. Additionally, it features integrated ground (IG) that eliminates the need for grounding conductor (GEC) on the DC side. The unique design of the BDM 600 model, in addition to being functional, it is unique and original, available only with NEP.

Features

• Low cost $/watt micro inverter
•  High continues output power up to 550Wac, recommended for dual max 360W solar panel
• High efficiency with 95.5% CEC
• Globally certified for UL1741, SAA, TUV, VDE-AR-N 4105, VDE 0126, G83/2, CEL 021, IEC61727, EN50438
• Integrated grounding for easy installation
• NEMA-6/IP-66/IP-67 enclosure rating
• Integrated monitoring and power line communication with RDG-256 gateway
• Can connect with BDM-300 and BDM-250

The Chilicon CP-250E allows installers to maximize PV system production, while minimizing installation and operational costs.

Simplicity
• All AC design – No string calculations needed
• No GEC needed for microinverters
• Easy installation with standardized trunk cables

The Chilicon CP‐720 allows installers to maximize PV system production, while minimizing installation and operational costs.

Simplicity
• All AC design – No string calculations needed
• No GEC needed for microinverters
• Easy installation with standardized trunk cables

The GATEWAY monitoring system communicates with Chilicon microinverters, consumption monitoring clamps, and other smart home devices. It can be cloud interconnected or can run stand-alone.

Features

• Secure Encryption to retain privacy
• Multi-rate, Error-Resistant Technology
• 255 microinverters per Gateway
• Stand-alone mode for privacy